András Tevesz

Senior Vulnerability Researcher
Linkedin

All posts by András Tevesz

  • Header image

    Thread Support for Flipper Zero, Part 3: Interfacing, Thread Networks and Data Sets

    • Labs
    • •10 min read

    In part two I explained how to set up the environment and build a working sample firmware application.

  • Header image

    Thread Support for Flipper Zero, Part 2: Setup

    • Labs
    • •7 min read

    Development Environment and a Working Matter and Thread Application.

  • Header image

    Thread Support for Flipper Zero, Part 1: Introduction

    • Labs
    • •9 min read

    This is the first part of the Thread Support for Flipper Zero series. The series tells the story of my OpenThread research and how I decided…

  • Hardware Hacking 101: E01 I2C Sniffing, How to Listen to Your Arduino’s I2C Bus

    • Labs
    • •7 min read

    Introduction Hardware hacking is one of those topics that I always had a great interest in, but almost always lacked the free time and equipment to…